Home | Cable Pulling | CABLE STOCKING (SINGLE EYE)

CABLE STOCKING (SINGLE EYE)

Single eye cable socks are ideal for pulling light to medium cables and are available in a full range of sizes from 10-300mm cable diameters and constructed from galvanised steel or 316 stainless steel with single or double lattice weave.

Typically used to pull-in LV MV HV Power Cables including single and multi-core BS5467 XLPE SWA armoured power cables, BS6622 11kV/33kV and BS7870 Triplex type medium/high voltage power cables.

Single eye cable socks can be used with either a single cable or a group of cables, where additional support is unnecessary or if used in conjunction with other cable socks.

See Specifications

Enquire Now

CABLE STOCKING (SINGLE EYE) Specifications

HOW TO USE SINGLE & DOUBLE EYE CABLE SOCKS

Prior to use the condition of the cable sock should always be checked for damage – ensure the correct size of sock is used for the intended cable diameter and approximate breaking strain.

1 Select the correct cable socks for the outside sheath diameter of the cable

2 Widen the lattice at end of cable sock – press end of sock against hard surface to induce expansion on the open end

3 Place the cable sock over the exposed end of the cable

4 Push sock over the cable

5 The cable sock needs to be pushed along cable length so that all the woven lattice is in contact with the cable sheath

6 Once the sock is in place and gripping the cable, 2 clamps should be fitted to the end of the sock. Recommend between 1 1/4″ (30mm) and 2 1/4″ (55mm) from end of the sock

7 Tape should then be wound around the end of the sock furthest away from the eye ends

8 This will prevent the cable sock from snagging when pulled in

Enquire Now

Industries Most Suited To

Lightning Protection

A direct lightning strike can cause severe damage to a building’s structure, and its internal electronic systems, putting lives at risk. From hig

Find Out More

Telecommunications

In telecommunication systems with peripheral equipment powered directly from mains, the system is earthed via all protective conductors (PE) and vi

Find Out More

Substation

Transmission networks carry high voltage (HV) electricity long distances across the country over transmission lines which, when interconnected, bec

Find Out More

ICP (Independent Connection Provider)

Powermet ICP product section was created to support the unique needs for the Independent Connection Provider (ICP), House Builders market, we are i

Find Out More

EV Charging

Powermet are supporting the ever-increasing demand for EV charger installs across the UK. We work closely with leading electrical contractors to en

Find Out More

Renewable Energy

Over 38% of the United Kingdom’s electricity production stems from renewable fuel sources, drawing upon a diverse array of renewable sources.

Find Out More

Interested In
CABLE STOCKING (SINGLE EYE)

Enquire Now

If you require further information or would like a quote, please drop us an email using the form below. Our expert team aim to get back to you within 48 hours. Alternatively, you can give call us on 0121 269 3852, our team are on hand to discuss more.

CABLE STOCKING (SINGLE EYE)

HOW TO USE SINGLE & DOUBLE EYE CABLE SOCKS

Interested In CABLE STOCKING (SINGLE EYE)

Interested In
CABLE STOCKING (SINGLE EYE)